W&H Assistina

Home › Equipment › Dental Sterilisation, Hygiene & Maintenance › W&H Dental Handpiece Maintenance › W&H Assistina

W&H Assistina Dental Handpiece maintenance

Perfect cleaning inside and outside

Now you can concentrate on what is really important: your patients. The fully automatic Assistina 3x3 takes over the time-consuming process of preparing e.g. straight and contra-angle handpieces and turbines for sterilization.

Assistina 3x3

Validated process in three steps

The instrument preparation with Assistina 3x3 is carried out in three steps. The complete process is validated and confirmed by expert opinion.

Step 1:
Automatic internal cleaning of the spray channels and transmission parts with W&H Activefluid. Blowing through spray channels and transmission parts with compressed air.

Step 2:
Automatic external cleaning of the instrument with W&H Activefluid.

Step 3:
Lubrication of the transmission parts with W&H Service Oil F1.

Assistina 3x3 features

Automatic internal cleaning
Automatic external cleaning
Perfect instrument lubrication
Short cycle time
Easy to use
Optimum price-performance ratio

Assistina 3x2

Validated process in two steps

The instrument preparation with Assistina 3x2 is carried out in two steps. The complete process is validated and confirmed by expert opinion.

Step 1:
Automatic internal cleaning of the spray channels and transmission parts with W&H Activefluid. Blowing through spray channels and transmission parts with compressed air

Step 2:
Lubrication of the transmission parts with W&H Service Oil F1.

Assistina 3x3 features

Automatic internal cleaning
Automatic external cleaning
Perfect instrument lubrication
Short cycle time
Easy to use
Optimum price-performance ratio

Your W&H Assistina is backed by locally based technical support

Contact Dental Intelligence today

W&H Assistina 3x3 / 3x2 Specifications

Type:	3x3	3x2
Supply voltage:	100 - 240 V AC
Permitted voltage fluctuation:	±10 %
Nominal current:	0.1 - 0.3 A
Frequency:	50 - 60 Hz
Max. power consumption:	40 VA
Air consumption:	approx. 100 Nl/min.	approx. 60 Nl/min.
Operating pressure:	5 - 10 bar (controlled via an integrated automatic pressure controller)
Max. volume:	70 dB	65 dB
Height / Width / Depth:	358 mm x 207 mm x 397 mm
Weight:	7.5 kg	6.5 kg
Capacity:	1000 ml W&H Activefluid, MC-1100 200 ml W&H Service Oil F1, MD-200
Designed for:	Straight and contra-angle handpieces, turbines, air motors and air-driven scalers

Visit W&H website for full specifications

SUB

SCR

IBE

(08) 9244 8888

Unit 2, 30 Enterprise Crescent, Malaga WA 6090

Links

Website by Perth designers & developers
Westways Visual Communication